Caterham CSR Trackday toy
A blog about my experiences with a Caterham CSR trackday toy.
Pages
(Move to ...)
Start page
About me
About my car
▼
2015-10-26
Unsprung weight
›
In order to get an estimate of the chassis unsprung weight, I weighted some parts. First I tried to put the wheel on a scale with the push...
2015-08-31
3D printed GoPro mount
›
I've tried various generic GoPro mounts over the years but they all have had problems with vibrations and wind in high speeds, and I...
2015-08-22
Bronze bushing
›
Another try with the front lower rear a-frame bush. Now in oil filled bronze bush, thrust washers and a custom made crush tube. This sol...
2015-08-11
3D-printed moulds for polyurethane bushes
›
For a couple of years ago I bought Powerflex polyurethane bushes and replaced the rubber bushes in the front suspension. I was never real...
1 comment:
2015-07-15
Bad earth troubleshooting
›
My engine has been a bit "moody" when idling. It can idle smooth, and then suddenly change idling speed. Some of the dash gauges h...
2015-07-05
Custom moulded ear plugs
›
I hate ear plugs. The sensation of being inside a bubble playing a video game has got me avoid them except when using power tools in the...
2015-03-16
3D printed cold air intake
›
Intake temperature has a direct correlation with engine power. For every 10°C rise in air intake temperature, engine power will be reduced...
2015-01-24
Rear bump steer
›
Bump/roll steer check on the rears for the first time, using a laser level on the brake disc and a mirror. I don't know why I haven...
2015-01-02
Airfoil behind roll cage CFD analysis
›
Does an airfoil generate downforce when placed behind a roll cage? Since I'm starting to get along with the CFD analysis software I d...
2014-12-25
Engine bay undertray aerodynamics
›
Some time ago I started to do some CFD analysis to see if I could do any simple changes that improved the aerodynamic properties of th...
2014-10-18
MOT, autumn and nothing much
›
The yearly MOT was a bit different. First attempt they refused to inspect the car as the guy said he'd not manage to get into the car...
2014-09-21
My wheel fell off on a trackday
›
At 137 km/h coming into a long right turn, my inner rear wheel fell off. A loud clonk and I could see how the inner rear wheel was bypas...
2 comments:
2014-08-26
New rims with stickers on
›
New 13" rims from Force Racing, 7" and 9" wide with brand new Dunlop slicks - "stickers". I bought the rims di...
2014-08-21
Gearbox disaster
›
My gearbox failed with a bang on on the King of Mantorp TA-event . Totally unexpected on the day's last cooldown lap. Looking at the ...
2014-07-06
TimeAttack - "King of Mantorp"
›
Valtonen Motorsport RX-8 Normally I don't like to compete but somehow I participated a Time Attack competition this weekend. S...
2014-07-02
Intake cone filter and air pressure
›
The Pipercross airbox I bough was supplied with a built in air-filter rated up to 200 hp. As don't want to strangle my engine I now...
2 comments:
2014-06-25
Attempt to redirect exhaust noise
›
As I previously wrote my noise levels are now down to 94-96 dbA on the intake side and 101 dbA on the exhaust side. In an attempt to re...
2014-06-22
Intake airbox
›
As I wrote in the previous post the track noise regulations in Sweden has become much harder lately. The current limit is 95 dBA drive-by...
2 comments:
2014-06-14
Raceco silencer
›
The track noise regulations in Sweden has become much harder lately. The current limit is 95 dBA drive by measured from a 10 m distance. ...
2014-05-30
Rear diffusor and front splitter inspiration
›
I more or less gave up on my CFD simulations . At least for a while. I could not get consistent results and the obstacles were just too many...
2 comments:
2014-04-07
Aerodynamics - CFD simulations
›
After some vacation reading of the book " Race car aerodynamics " I have had lots of thoughts of how to improve the car's a...
‹
›
Home
View web version